Additive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components
Author: Joshua Pelleg
Publsiher: Elsevier
Total Pages: 656
Release: 2020-04-30
ISBN: 012821919X
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Additive and Traditionally Manufactured Components Book Excerpt:

Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM. Thoroughly explores AM processes that can be utilized for experimental design Includes a review of dislocations observed in specimens obtained by AM Compares the impact of both additive and traditional manufacturing techniques on the mechanical properties of materials

Additive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components
Author: Joshua Pelleg
Publsiher: Additive Manufacturing Materia
Total Pages: 618
Release: 2020-05
ISBN: 0128219181
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Additive and Traditionally Manufactured Components Book Excerpt:

Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.

Design for Additive Manufacturing

Design for Additive Manufacturing
Author: Martin Leary
Publsiher: Elsevier
Total Pages: 358
Release: 2019-12-03
ISBN: 0128168870
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Design for Additive Manufacturing Book Excerpt:

Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies Provides systematic methods for optimizing AM process selection for specific production requirement Addresses design tools for both metallic and polymeric AM technologies Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors

3D Printing Breakthroughs in Research and Practice

3D Printing  Breakthroughs in Research and Practice
Author: Management Association, Information Resources
Publsiher: IGI Global
Total Pages: 417
Release: 2016-10-06
ISBN: 1522516786
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

3D Printing Breakthroughs in Research and Practice Book Excerpt:

The advancement of modern technology has allowed for impressive developments in manufacturing processes. Out of these developments, 3D printing has emerged as a new method. 3D Printing: Breakthroughs in Research and Practice is a comprehensive reference source for the latest research and advances on 3D printing processes, technologies, and methods. Highlighting emerging perspectives on manufacturing and industrial applications, this book is ideally designed for professionals, practitioners, students, and researchers interested in the latest developments and uses of 3D printing.

Manufacturing Techniques for Materials

Manufacturing Techniques for Materials
Author: T.S. Srivatsan,T.S. Sudarshan,K. Manigandan
Publsiher: CRC Press
Total Pages: 790
Release: 2018-04-09
ISBN: 1351597183
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Manufacturing Techniques for Materials Book Excerpt:

Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

3D Printing Design

3D Printing   Design
Author: Dr. Sabrie Soloman
Publsiher: KHANNA PUBLISHING HOUSE
Total Pages: 436
Release: 2022
ISBN: 938617376X
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

3D Printing Design Book Excerpt:

The book provides a detailed guide and optimum implementations to each of the stated 3D printing technology, the basic understanding of its operation, and the similarity as well as the dissimilarity functions of each printer. School Students, University undergraduates, and post graduate student will find the book of immense value to equip them not only with the fundamental in design and implementation but also will encourage them to acquire a system and practice creating their own innovative samples. Furthermore, professionals and educators will be well prepared to use the knowledge and the expertise to practice and advance the technology for the ultimate good of their respective organizations.

Superalloys 2020

Superalloys 2020
Author: Sammy Tin,Mark Hardy,Justin Clews,Jonathan Cormier,Qiang Feng,John Marcin,Chris O'Brien,Akane Suzuki
Publsiher: Springer Nature
Total Pages: 1098
Release: 2020-08-28
ISBN: 3030518345
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Superalloys 2020 Book Excerpt:

The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Mobile Wireless Middleware Operating Systems and Applications

Mobile Wireless Middleware  Operating Systems and Applications
Author: Dalai Tang
Publsiher: Springer Nature
Total Pages: 135
Release: 2022
ISBN: 3030986713
Category: Electronic Book
Language: EN, FR, DE, ES & NL

Mobile Wireless Middleware Operating Systems and Applications Book Excerpt:

Advances in Ergonomics of Manufacturing Managing the Enterprise of the Future

Advances in Ergonomics of Manufacturing  Managing the Enterprise of the Future
Author: Christopher Schlick,Stefan Trzcieliński
Publsiher: Springer
Total Pages: 631
Release: 2016-07-26
ISBN: 3319416979
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Advances in Ergonomics of Manufacturing Managing the Enterprise of the Future Book Excerpt:

This book discusses the latest advances in people-centered design, operation, and management of broadly defined advanced manufacturing systems and processes. It reports on human factors issues related to various research areas such as intelligent manufacturing technologies, web-based manufacturing services, digital manufacturing worlds, and manufacturing knowledge support systems, as well as other contemporary manufacturing environments. The book covers an extensive range of applications of human factors in the manufacturing industry: from work design, supply chains, evaluation of work systems, and social and organization design, to manufacturing systems, simulation and visualization, automation in manufacturing, and many others. Special emphasis is given to computer aided manufacturing technologies supporting enterprises, both in general and in the manufacturing industry in particular, such as knowledge-based systems, virtual reality, artificial intelligence methods, and many more. Based on the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, the book provides readers with a timely snapshot of the enterprises of the future and a set of cutting-edge technologies and methods for building innovative, human-centered, and computer-integrated manufacturing systems.

Design and Manufacture of Plastic Components for Multifunctionality

Design and Manufacture of Plastic Components for Multifunctionality
Author: Vannessa Dr Goodship,Bethany Middleton,Ruth Cherrington
Publsiher: William Andrew
Total Pages: 236
Release: 2015-09-08
ISBN: 0323353843
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Design and Manufacture of Plastic Components for Multifunctionality Book Excerpt:

Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing presents the latest information on how plastics manufacturers are increasingly being driven towards carbon emission reduction, lightweighting, and cost savings through process integration. These technologies have the potential to revolutionize future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages. This book introduces the three core manufacturing methods for multifunctional materials, composites, injection molding, and 3D printing, all processes facing challenges for the implementation of new technology. Users will find a book that brings together both process and material advances in this area, giving process engineers, designers, and manufacturers the information they need to choose the appropriate material and process for the product they are developing. Provides an introduction to the latest technologies in the area of multifunctionality, enabling engineers to implement new breakthroughs in their own businesses Gives an understanding of the processes that need to be considered in both design and manufacture of future devices, while using materials from a broader palette than used in existing manufacturing processes Includes best practice guidance and flow charts to aid in material and process selection Covers revolutionary future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages

Residual Stress Distributions in Additively Manufactured Parts

Residual Stress Distributions in Additively Manufactured Parts
Author: Prabhat Pant
Publsiher: Linköping University Electronic Press
Total Pages: 47
Release: 2020-03-05
ISBN: 917929913X
Category: Electronic Book
Language: EN, FR, DE, ES & NL

Residual Stress Distributions in Additively Manufactured Parts Book Excerpt:

Additive manufacturing (AM) of parts using a layer by layer approach has seen a rapid increase in application for production of net shape or near-net shape complex parts, especially in the field of aerospace, automotive, etc. Due to the superiority of manufacturing complex shapes with ease in comparison to the conventional methods, interest in these kinds of processes has increased. Among various methods in AM, laser powder bed fusion (LPBF) is one of the most widely used techniques to produce metallic components. As in all manufacturing processes, residual stress (RS) generation during manufacturing is a relevant issue for the AM process. RS in AM are generated due to a high thermal gradient between subsequent layers. The impact of residual stresses can be significant for the mechanical integrity of the built parts and understanding the generation of RS and the effect of AM process parameters is therefore important for a broader implementation of AM techniques. The work presented in this licentiate thesis aims to investigate the influence of build orientation on the RS distribution in AM parts. For this purpose, L-shaped Inconel 718 parts were printed by LPBF in three different orientations, 0°, 45°, and 90°, respectively. Inconel 718 was selected because it is a superalloy widely used for making gas turbine components. In addition, IN718 has in general good weldability which renders it a good material for additive manufacturing. Residual stress distributions in the parts removed from the build plate were measured using neutron diffraction technique. A simple finite element model was developed to predict the residual stresses and the effect of RS relaxation due to the separation of the parts and build plate. The trend of residual stress distribution predicted was in good agreement with experimental results. In general, compressive RS at the part center and tensile RS near the surface were found. However, while the part printed in 0° orientation had the least amount of RS in all three principal directions of part, the part built in 90° orientation possessed the highest amount of RS in both compression and tension. The study has shown that residual stress distributions in the parts are strongly dependent on the building process. Further, it has shown that the relaxation of RS associated with the removal of the parts from the build plate after printing has a great impact on the final distribution of residual stress in the parts. These results can be used as guidelines for choosing the orientations of the part during printing.

Micromanufacturing of Metallic Materials

Micromanufacturing of Metallic Materials
Author: Jingwei Zhao,Zhengyi Jiang,Leszek Adam Dobrzański,Chong Soo Lee
Publsiher: MDPI
Total Pages: 236
Release: 2021-01-13
ISBN: 3039435094
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Micromanufacturing of Metallic Materials Book Excerpt:

Product miniaturization is a trend for facilitating product usage, enabling product functions to be implemented in microscale geometries, and aimed at reducing product weight, volume, cost and pollution. Driven by ongoing miniaturization in diverse areas, including medical devices, precision equipment, communication devices, micro-electromechanical systems and microsystems technology, the demands for micro metallic products have been tremendously increased. Such a trend requires the development of advanced technology for the micromanufacturing of metallic materials, with regard to producing high-quality micro metallic products that possess excellent dimensional tolerances, the required mechanical properties and improved surface quality. Micromanufacturing differs from conventional manufacturing technology in terms of materials, processes, tools, and machines and equipment, due to the miniaturization nature of the whole micromanufacturing system, which challenges the rapid development of micromanufacturing technology. Such a background has prompted and encouraged us to publish a scholarly book on the topic of the micromanufacturing of metallic materials, with the purpose of providing readers with a valuable document that can be used in the research and development of micromanufacturing technology. This book will be useful for both theoretical and applied research aimed at micromanufacturing technology, and will serve as an important research tool, providing knowledge to be returned to the community not only as valuable scientific literature, but also as technology, processes and productivities.

CAD CAM Robotics and Factories of the Future

CAD CAM  Robotics and Factories of the Future
Author: Dipak Kumar Mandal,Chanan Singh Syan
Publsiher: Springer
Total Pages: 853
Release: 2016-01-05
ISBN: 8132227409
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

CAD CAM Robotics and Factories of the Future Book Excerpt:

This volume is based on the proceedings of the 28th International Conference on CAD/CAM, Robotics and Factories of the Future. This book specially focuses on the positive changes made in the field of robotics, CAD/CAM and future outlook for emerging manufacturing units. Some of the important topics discussed in the conference are product development and sustainability, modeling and simulation, automation, robotics and handling systems, supply chain management and logistics, advanced manufacturing processes, human aspects in engineering activities, emerging scenarios in engineering education and training. The contents of this set of proceedings will prove useful to both researchers and practitioners.

TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings

TMS 2020 149th Annual Meeting   Exhibition Supplemental Proceedings
Author: The Minerals, Metals & Materials Society
Publsiher: Springer Nature
Total Pages: 2170
Release: 2020-02-13
ISBN: 3030362965
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings Book Excerpt:

This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Additive Manufacturing

Additive Manufacturing
Author: Amit Bandyopadhyay,Susmita Bose
Publsiher: CRC Press
Total Pages: 389
Release: 2015-09-08
ISBN: 1482223600
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Additive Manufacturing Book Excerpt:

The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, most engineered devices are 3D printed first to check their shape, size, and functionality before large-scale production. In addition, as the cost of 3D printers has come down significantly, and the printers’ reliability and part quality have improved, schools and universities have been investing in 3D printers to experience, explore, and innovate with these fascinating additive manufacturing technologies. Additive Manufacturing highlights the latest advancements in 3D printing and additive manufacturing technologies. Focusing on additive manufacturing applications rather than on core 3D printing technologies, this book: Introduces various additive manufacturing technologies based on their utilization in different classes of materials Discusses important application areas of additive manufacturing, including medicine, education, and the space industry Explores regulatory challenges associated with the emergence of additive manufacturing as a mature technological platform By showing how 3D printing and additive manufacturing technologies are currently used, Additive Manufacturing not only provides a valuable reference for veteran researchers and those entering this exciting field, but also encourages innovation in future additive manufacturing applications.

Computational Methods and Experimental Measurements XX

Computational Methods and Experimental Measurements XX
Author: S. Hernández ,G. M. Carlomagno
Publsiher: WIT Press
Total Pages: 162
Release: 2021-07-26
ISBN: 1784664251
Category: Mathematics
Language: EN, FR, DE, ES & NL

Computational Methods and Experimental Measurements XX Book Excerpt:

Formed of papers presented at the 20th International Conference on Computational Methods and Experimental Measurements, this volume provides a view of the latest work on the interaction between computational methods and experiments. The continuous improvement in computer efficiency, coupled with diminishing costs and the rapid development of numerical procedures have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. As these procedures continue to grow in magnitude and complexity, it is essential to validate their results to be certain of their reliability. This can be achieved by performing dedicated and accurate experiments, which have undergone constant and enormous development. At the same time, current experimental techniques have become more complex and sophisticated so that they require the intensive use of computers, both for running experiments as well as acquiring and processing the resulting data. Some of the subject areas covered are Fluid flow studies and experiments; Structural and stress analysis; Materials characterization; Electromagnetic problems; Structural integrity; Destructive and non-destructive testing; Heat transfer and thermal processes; Advances in computational methods; Automotive applications; Aerospace applications; Ocean engineering and marine structures; Fluid-structure interaction; Bio-electromagnetics; Process simulations; Environmental monitoring, modelling and applications; Validation of computer modelling; Data and signal processing; Virtual testing and verification; Electromagnetic compatibility; Life cycle assessment.

Technical Economic and Societal Effects of Manufacturing 4 0

Technical  Economic and Societal Effects of Manufacturing 4 0
Author: Mikael Collan,Karl-Erik Michelsen
Publsiher: Springer Nature
Total Pages: 266
Release: 2020-07-28
ISBN: 3030461033
Category: Business & Economics
Language: EN, FR, DE, ES & NL

Technical Economic and Societal Effects of Manufacturing 4 0 Book Excerpt:

This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.

Modelling Behaviour

Modelling Behaviour
Author: Mette Ramsgaard Thomsen,Martin Tamke,Christoph Gengnagel,Billie Faircloth,Fabian Scheurer
Publsiher: Springer
Total Pages: 544
Release: 2015-11-12
ISBN: 3319242083
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Modelling Behaviour Book Excerpt:

This book reflects and expands on the current trend in the building industry to understand, simulate and ultimately design buildings by taking into consideration the interlinked elements and forces that act on them. This approach overcomes the traditional, exclusive focus on building tasks, while posing new challenges in all areas of the industry from material and structural to the urban scale. Contributions from invited experts, papers and case studies provide the reader with a comprehensive overview of the field, as well as perspectives from related disciplines, such as computer science. The chapter authors were invited speakers at the 5th Symposium "Modelling Behaviour", which took place at the CITA in Copenhagen in September 2015.

Value Based and Intelligent Asset Management

Value Based and Intelligent Asset Management
Author: Adolfo Crespo Márquez,Marco Macchi,Ajith Kumar Parlikad
Publsiher: Springer
Total Pages: 403
Release: 2019-06-29
ISBN: 3030207048
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Value Based and Intelligent Asset Management Book Excerpt:

The fundamental motivation of this book is to contribute to the future advancement of Asset Management in the context of industrial plants and infrastructures. The book aims to foster a future perspective that takes advantage of value-based and intelligent asset management in order to make a step forward with respect to the evolution observed nowadays. Indeed, the current understanding of asset management is primarily supported by well-known standards. Nonetheless, asset management is still a young discipline and the knowledge developed by industry and academia is not set in stone yet. Furthermore, current trends in new organizational concepts and technologies lead to an evolutionary path in the field. Therefore, this book aims to discuss this evolutionary path, starting first of all from the consolidated theory, then moving forward to discuss: • The strategic understanding of value-based asset management in a company; • An operational definition of value, as a concept on the background of value-based asset management; • The identification of intelligent asset management, with the aim to frame a set of “tools” recommended to support the asset-related decision-making process over the asset lifecycle; • The emergence of new technologies such as cyber physical systems and digital twins, and the implications of this on asset management.

Additive Manufacturing of Functional Engineering Components

Additive Manufacturing of Functional Engineering Components
Author: Rhys Owen Jones
Publsiher: Unknown
Total Pages: 135
Release: 2013
ISBN: 1928374650XXX
Category: Electronic Book
Language: EN, FR, DE, ES & NL

Additive Manufacturing of Functional Engineering Components Book Excerpt: