Maintaining and Troubleshooting Your 3D Printer

Maintaining and Troubleshooting Your 3D Printer
Author: Charles Bell
Publsiher: Apress
Total Pages: 528
Release: 2014-09-17
ISBN: 1430268085
Category: Computers
Language: EN, FR, DE, ES & NL

Maintaining and Troubleshooting Your 3D Printer Book Excerpt:

Maintaining and Troubleshooting Your 3D Printer by Charles Bell is your guide to keeping your 3D printer running through preventive maintenance, repair, and diagnosing and solving problems in 3D printing. If you’ve bought or built a 3D printer such as a MakerBot only to be confounded by jagged edges, corner lift, top layers that aren’t solid, or any of a myriad of other problems that plague 3D printer enthusiasts, then here is the book to help you get past all that and recapture the joy of creative fabrication. The book also includes valuable tips for builders and those who want to modify their printers to get the most out of their investment. Good fabrication begins with calibration. Aligning the print bed to support deposition of medium in three dimensions is critical. Even off-the-shelf machines that are pre-built must be aligned and periodically realigned throughout their life cycle. Maintaining and Troubleshooting Your 3D Printer helps you achieve and hold proper alignment. Maintaining and Troubleshooting Your 3D Printer also helps with software and hardware troubleshooting. You’ll learn to diagnose and solve firmware calibration problems, filament and feed problems, chassis issues, and more. Finally there are regular maintenance and enhancements. You’ve invested significantly in your 3D printer. Protect that investment using the guidance in this book. Learn to clean and lubricate your printer, to maintain the chassis, and know when realignment of the print bed is needed. Learn ways to master your craft and improve the quality of your prints through such things as post-print finishing and filament management. Don’t let the challenges of 3D printing stand in the way of creativity. Maintaining and Troubleshooting Your 3D Printer by Charles Bell helps you conquer the challenges and get the most benefit from your expensive investment in personal fabrication.

3D Printing with Delta Printers

3D Printing with Delta Printers
Author: Charles Bell
Publsiher: Apress
Total Pages: 368
Release: 2015-07-14
ISBN: 1484211731
Category: Computers
Language: EN, FR, DE, ES & NL

3D Printing with Delta Printers Book Excerpt:

Do you find yourself wondering what the fuss is about a delta 3D printer? Perhaps you’ve decided to buy one but all of your 3D printing friends are busily perfecting their Cartesian printers. Maybe you find yourself stymied by the fact that your delta printer has very different needs for setup, configuration, calibration, and maintenance than Cartesian printers. 3D Printing with Delta Printers contains detailed descriptions of the innovative delta design including unique hardware, software, and maintenance requirements. The book also covers tips for building your own delta printer as well as examples of common enhancements. This book will enable you to build, configure, and enhance your delta printer. The topics covered will reveal the often-mysterious nuances of the delta design that will enable your printer to compete with the best of what your 3D printer friends can build.

Troubleshooting Common 3D PRINTING Errors for the Elderly

Troubleshooting Common 3D PRINTING Errors for the Elderly
Author: Martins O Gilbert
Publsiher: Unknown
Total Pages: 164
Release: 2020-01-23
ISBN: 1928374650XXX
Category: Electronic Book
Language: EN, FR, DE, ES & NL

Troubleshooting Common 3D PRINTING Errors for the Elderly Book Excerpt:

THE 2020 PRACTICAL GUIDE TO IDENTIFY AND FIX 3D PRINTING ERRORS FOR THE ELDERLY With 3D printing becoming popular among hobbyists, educational intuitions, and professionals, it is crucial to address issues arising with the use of these machines. From his years of experience with FDM printers as well as feedback he gets from readers on his blog, Martins outlined common and not so common 3D printing errors faced by users and proffered solutions to these errors in the most practical way. This book is written to help both beginners to 3D printing, and professionals identify printing errors and how to troubleshoot these errors in a step by step approach. Information you will get from this book include; Printing Parts of FDM Printer Identifying the right NozzleMaterials for quality 3D prints Guide to Swap Nozzles Understanding printing Material Science Recommended 3D printers for Home Use in 2020 The 3D Printing Process Understand Computer-Aided Design (CAD) Software Understand Slicing Software The 3D Printer parts and their functions 3D Printer Maintenance Tools you should have Mandatory Maintenance steps Safety Considerations in 3D printing Understand Thermal Runaway Protection Fixing Bed Adhesion Fixing Build Plate Heat Troubles Troubleshooting Bed Adhesion Problems Troubleshooting Prints Not Sticking to the Bed Troubleshooting Build Plate Not Heating Fixing Hot End Issues Diagnosing and fixing Hotend Not Maintaining Temperature PID Autotune and the ideal time to carry it out Fixing Under extrusion Troubles Fixing Extruder Stepper Skipping issues Fixing Ghosting Troubleshooting Elephant Foot Fixing Pillowing errors and why they occur Troubleshooting problems with Blind LCD Troubleshooting Missing Layers Fixing Layer Shift Warping and to eliminate them Fixing Gaps in Wall Fixing problems with Built-up Nozzle Fixing Filament Issues And lots more Don't wait anymore, scroll up, and click on the BUY BUTTON to get this troubleshooting manual into your Library.

3D Printing with MatterControl

3D Printing with MatterControl
Author: Joan Horvath,Rich Cameron
Publsiher: Apress
Total Pages: 172
Release: 2015-09-14
ISBN: 1484210557
Category: Computers
Language: EN, FR, DE, ES & NL

3D Printing with MatterControl Book Excerpt:

In 3D Printing With MatterControl, Joan Horvath and Rich Cameron, the team behind Mastering 3D Printing, explain step-by-step how to use the MatterControl program, which allows you to control many common types of 3D printers (including both cartesian and delta style machines). 3D Printing With MatterControl can stand alone, or it can be a companion to Mastering 3D Printing to show you how to install, configure, and use best practices with your printer and printing software. The book includes both step by step software walkthroughs and case studies with typical 3D printed objects. Whether you are a "maker" or a teacher of makers, 3D Printing with MatterControl will show you how to get the most out of your printer with the new standard for open source 3D printing software. While there are books available on 3D printers, and even a few on software to make models for printers, there are few good sources covering the software that actually controls these printers. MatterControl is emerging as the leading open source software for 3D printers, and 3D Printing With MatterControl covers this new standard in this brief book.

3D Printing Guide for Newcomers

3D Printing Guide for Newcomers
Author: Stephen W. Rock
Publsiher: Independently Published
Total Pages: 60
Release: 2019-01-15
ISBN: 9781794187436
Category: Computers
Language: EN, FR, DE, ES & NL

3D Printing Guide for Newcomers Book Excerpt:

In a time like this where 3D design and printing is a skill that many people wish to acquire, you'll agree that a beginners guide is irreplaceable. This is where this book comes in; to introduce you to 3D printing. You'll be guided throughout the whole process of: 1. Designing and printing a 3D object. 2. Troubleshooting your 3D printer as a beginner. 3. Tips and tricks for optimizing your 3D printer. 4. How to maintain your printer. The last chapter of the book discusses briefly how to use SketchUp as a beginner. Good enough, the author, a tech researcher and addict, explains the whole process of 3D printing in simple grammar syntax, as if he were writing for kids. When you buy the paperback version of this book, you'll get the eBook free. This introduction to 3D printing is all you need t get started. Buy it now and become a pro in 3D printing! About The Author Stephen Rock has been a certified apps developer and tech researcher for more than12 years. Some of his 'how to' guides have appeared in a handful of international journals and tech blogs. He loves rabbits.

The New Shop Class

The New Shop Class
Author: Joan Horvath,Richard Cameron,Doug Adrianson
Publsiher: Apress
Total Pages: 260
Release: 2015-05-11
ISBN: 1484209044
Category: Computers
Language: EN, FR, DE, ES & NL

The New Shop Class Book Excerpt:

The New Shop Class connects the worlds of the maker and hacker with that of the scientist and engineer. If you are a parent or educator or a budding maker yourself, and you feel overwhelmed with all of the possible technologies, this book will get you started with clear discussions of what open source technologies like 3D printers, Arduinos, robots and wearable tech can really do in the right hands. Written by real "rocket scientist" Joan Horvath, author of Mastering 3D Printing, and 3D printing expert Rich Cameron (AKA whosawhatsis), The New Shop Class is a friendly, down-to-earth chat about how hands-on making things can lead to a science career. Get practical suggestions about how to use technologies like 3D printing, Arduino, and simple electronics Learn how to stay a step ahead of the young makers in your life and how to encourage them in maker activities Discover how engineers and scientists got their start, and how their mindsets mirror that of the maker

3D Printing for Beginners

3D Printing for Beginners
Author: Stephen W Rock
Publsiher: Unknown
Total Pages: 58
Release: 2019-08-19
ISBN: 9781687309655
Category: Electronic Book
Language: EN, FR, DE, ES & NL

3D Printing for Beginners Book Excerpt:

In a time like this where learning 3D design and printing is something that many people wish for, a beginners guide becomes irreplaceable. This is where this book comes in; to introduce you to 3D printing. You'll be guided throughout the whole process of: 1. Designing and printing a 3D object. 2. Troubleshooting your 3D printer as a beginner. 3. Tips and tricks for optimizing your 3D printer. 4. How to maintain your printer. The last chapter of the book discusses briefly how to use SketchUp as a beginner. Good enough, the author, a tech researcher and addict, explains the whole process of 3D printing in simple grammar syntax, as if he were writing for kids. When you buy the paperback version of this book, you'll get the eBook free. This introduction to 3D printing is all you need t get started. Buy it now and become a pro in 3D printing! About The Author Stephen Rock has been a certified apps developer and tech researcher for more than12 years. Some of his 'how to' guides have appeared in a handful of international journals and tech blogs. He loves rabbits.

3D PRINTING MADE EASY updated

3D PRINTING MADE EASY  updated
Author: Stephen W Rock
Publsiher: Unknown
Total Pages: 58
Release: 2020-05-13
ISBN: 1928374650XXX
Category: Electronic Book
Language: EN, FR, DE, ES & NL

3D PRINTING MADE EASY updated Book Excerpt:

In a time like this where learning 3D design and printing is something that many people wish for, a beginners guide becomes irreplaceable. This is where this book comes in; to introduce you to 3D printing. You'll be guided throughout the whole process of: 1. Designing and printing a 3D object. 2. Troubleshooting your 3D printer as a beginner. 3. Tips and tricks for optimizing your 3D printer. 4. How to maintain your printer. The last chapter of the book discusses briefly how to use SketchUp as a beginner. Good enough, the author, a tech researcher and addict, explains the whole process of 3D printing in simple grammar syntax, as if he were writing for kids. When you buy the paperback version of this book, you'll get the eBook free. This introduction to 3D printing is all you need t get started. Buy it now and become a pro in 3D printing! About The Author Stephen Rock has been a certified apps developer and tech researcher for more than12 years. Some of his 'how to' guides have appeared in a handful of international journals and tech blogs. He loves rabbits.

3D Printing Guide

3D Printing Guide
Author: Jim Richard
Publsiher: Unknown
Total Pages: 98
Release: 2020-04-10
ISBN: 1928374650XXX
Category: Electronic Book
Language: EN, FR, DE, ES & NL

3D Printing Guide Book Excerpt:

I welcome you with great pleasure in a world of infinite possibilities with 3D printing. As the 3D printing industry continues to inspire the world greatly, you can now join the hobbyists, entrepreneurs, professionals and business people around the world who use their 3D printers to achieve almost anything they want to make. From printing body parts, food, candlesticks, to virtually anything you can imagine. Find the easiest and fastest ways to grasp the fundamentals of 3D printing. You will learn how you can effectively carry out your first printing jobs successfully, and how to maintain and troubleshoot common failures with this easy- to -follow 3D PRINTING GUIDE, designed to answer all your 3D printing questions and cater to your 3D printing needs. You will also find images to support the explanations, with a clear and easy to understand approach.Are you looking for an excellent and complete guide for Engineers, Architects, creative people, teenagers, students, inventors or anyone interested in exploring the world of 3D printing? This guide is for you.A brief overview of some of what you will also learn in this guide include: What is 3D printing?What can be 3D printed?Types of 3D printers?Essential tools and accessories for 3D printingPrinting Materials3D printing processHow 3D printers workUsing CAD (Computer Aided Software)How to find models online?The FFF 3D printing processSlicer settings with tips and tricks on how to slice like a proMandatory maintenance for your 3D printerHow to calibrate your 3D printerBenefits of 3D printing over mass printingMost common 3D failures and how to fight them.Why are you still waiting? Click the "Buy" button to make this printing guide yours now

MySQL for the Internet of Things

MySQL for the Internet of Things
Author: Charles Bell
Publsiher: Apress
Total Pages: 335
Release: 2016-02-13
ISBN: 1484212932
Category: Computers
Language: EN, FR, DE, ES & NL

MySQL for the Internet of Things Book Excerpt:

This book introduces the problems facing Internet of Things developers and explores current technologies and techniques to help you manage, mine, and make sense of the data being collected through the use of the world’s most popular database on the Internet - MySQL. The IoT is poised to change how we interact with and perceive the world around us, and the possibilities are nearly boundless. As more and more connected devices generate data, we will need to solve the problem of how to collect, store, and make sense of IoT data by leveraging the power of database systems. The book begins with an introduction of the MySQL database system and storage of sensor data. Detailed instructions and examples are provided to show how to add database nodes to IoT solutions including how to leverage MySQL high availability, including examples of how to protect data from node outages using advanced features of MySQL. The book closes with a comparison of raw and transformed data showing how transformed data can improve understandability and help you cut through a clutter of superfluous data toward the goal of mining nuggets of useful knowledge. In this book, you'll learn to: Understand the crisis of vast volumes of data from connected devices Transform data to improve reporting and reduce storage volume Store and aggregate your IoT data across multiple database servers Build localized, low-cost MySQL database servers using small and inexpensive computers Connect Arduino boards and other devices directly to MySQL database servers Build high availability MySQL solutions among low-power computing devices

Advances in Design for Inclusion

Advances in Design for Inclusion
Author: Giuseppe Di Bucchianico,Pete Kercher
Publsiher: Springer
Total Pages: 638
Release: 2016-08-16
ISBN: 3319419625
Category: Technology & Engineering
Language: EN, FR, DE, ES & NL

Advances in Design for Inclusion Book Excerpt:

This book focuses on a range of topics in design, such as universal design, design for all, digital inclusion, universal usability, and accessibility of technologies independently of people’s age, economic situation, education, geographic location, culture and language. It especially focuses on accessibility for people with auditory, cognitive, neurological, and visual impairments, ageing populations, and mobility for physical special needs. The book explores some of the overlaps between inclusive design and web accessibility to help managers, designers, developers, policy makers, and researchers optimize their efforts in these overlapping areas. Based on the AHFE 2016 International Conference on Design for Inclusion, held on July 27-31, 2016, in Walt Disney World®, Florida, USA, this book discusses new design technologies, highlighting various requirements of individuals within a community. Thanks to its multidisciplinary approach, the book represents a useful resource for readers with different kinds of backgrounds and provides them with a timely, practice-oriented guide to design for inclusion.

3D Printing Guide for Senior Citizens

3D Printing Guide for Senior Citizens
Author: Jim Richard
Publsiher: Unknown
Total Pages: 114
Release: 2020-10-04
ISBN: 1928374650XXX
Category: Electronic Book
Language: EN, FR, DE, ES & NL

3D Printing Guide for Senior Citizens Book Excerpt:

I welcome you with great pleasure in a world of infinite possibilities with 3D printing. As the 3D printing industry continues to inspire the world extensively, you can now join the hobbyists, entrepreneurs, professionals, and business people around the world who use their 3D printers to achieve almost anything they want to make from printing body parts, food, candlesticks, to virtually anything you can imagine. Find the easiest and fastest ways to grasp the fundamentals of 3D printing. You will learn how you can effectively carry out your first printing jobs successfully and how to maintain and troubleshoot common failures with this easy- to -follow 3D PRINTING GUIDE, designed to answer all your 3D printing questions and cater to your 3D printing needs. You will also find images to support the explanations, with a clear and easy to understand approach. Are you looking for an excellent and complete guide for Engineers, Architects, creative people, teenagers, students, inventors, or anyone interested in exploring the world of 3D printing? This guide is for you. A brief overview of some of what you will also learn in this guide include: What is 3D printing? What can be 3D printed? Types of 3D printers? Essential tools and accessories for 3D printing Printing Materials 3D printing process How 3D printers work Using CAD (Computer Aided Software) How to find models online? The FFF 3D printing process Slicer settings with tips and tricks on how to slice like a pro Mandatory maintenance for your 3D printer How to calibrate your 3D printer Benefits of 3D printing over mass printing Most common 3D failures and how to fight them. Why are you still waiting? Click the "Buy" button to make this printing guide yours now!

Practical 3D Printers

Practical 3D Printers
Author: Brian Evans
Publsiher: Apress
Total Pages: 332
Release: 2012-09-25
ISBN: 1430243937
Category: Computers
Language: EN, FR, DE, ES & NL

Practical 3D Printers Book Excerpt:

Desktop or DIY 3D printers are devices you can either buy preassembled as a kit, or build from a collection of parts to design and print physical objects including replacement household parts, custom toys, and even art, science, or engineering projects. Maybe you have one, or maybe you're thinking about buying or building one. Practical 3D Printers takes you beyond how to build a 3D printer, to calibrating, customizing, and creating amazing models, including 3D printed text, a warship model, a robot platform, windup toys, and arcade-inspired alien invaders. You'll learn about the different types of personal 3D printers and how they work; from the MakerBot to the RepRap printers like the Huxley and Mendel, as well as the whiteAnt CNC featured in the Apress book Printing in Plastic. You'll discover how easy it is to find and design 3D models using web-based 3D modeling, and even how to create a 3D model from a 2D image. After learning the basics, this book will walk you through building multi-part models with a steampunk warship project, working with meshes to build your own action heroes, and creating an autonomous robot chassis. Finally, you'll find even more bonus projects to build, including wind-up walkers, faceted vases for the home, and a handful of useful upgrades to modify and improve your 3D printer.

Troubleshooting COMMON 3D PRINTING Errors

Troubleshooting COMMON 3D PRINTING Errors
Author: Martins .O.,Martins Gilbert O
Publsiher: Unknown
Total Pages: 130
Release: 2020-01-16
ISBN: 9781660155972
Category: Electronic Book
Language: EN, FR, DE, ES & NL

Troubleshooting COMMON 3D PRINTING Errors Book Excerpt:

THE 2020 PRACTICAL GUIDE TO IDENTIFY AND FIX 3D PRINTING ERRORS With 3D printing becoming popular among hobbyists, educational intuitions, and professionals, it is crucial to address issues arising with the use of these machines. From his years of experience with FDM printers as well as feedback he gets from readers on his blog, Martins outlined common and not so common 3D printing errors faced by users and proffered solutions to these errors in the most practical way. This book is written to help both beginners to 3D printing, and professionals identify printing errors and how to troubleshoot these errors in a step by step approach. Information you will get from this book include; Printing Parts of FDM Printer Identifying the right NozzleMaterials for quality 3D prints Guide to Swap Nozzles Understanding printing Material Science Recommended 3D printers for Home Use in 2020 The 3D Printing Process Understand Computer-Aided Design (CAD) Software Understand Slicing Software The 3D Printer parts and their functions 3D Printer Maintenance Tools you should have Mandatory Maintenance steps Safety Considerations in 3D printing Understand Thermal Runaway Protection Fixing Bed Adhesion Fixing Build Plate Heat Troubles Troubleshooting Bed Adhesion Problems Troubleshooting Prints Not Sticking to the Bed Troubleshooting Build Plate Not Heating Fixing Hot End Issues Diagnosing and fixing Hotend Not Maintaining Temperature PID Autotune and the ideal time to carry it out Fixing Under extrusion Troubles Fixing Extruder Stepper Skipping issues Fixing Ghosting Troubleshooting Elephant Foot Fixing Pillowing errors and why they occur Troubleshooting problems with Blind LCD Troubleshooting Missing Layers Fixing Layer Shift Warping and to eliminate them Fixing Gaps in Wall Fixing problems with Built-up Nozzle Fixing Filament Issues And lots more Don't wait anymore, scroll up, and click on the BUY BUTTON to get this troubleshooting manual into your Library.

My HTC Evo 3D

My HTC Evo 3D
Author: Lonzell Watson,Craig James Johnston
Publsiher: Que Publishing
Total Pages: 386
Release: 2011-11-16
ISBN: 0789749092
Category: Computers
Language: EN, FR, DE, ES & NL

My HTC Evo 3D Book Excerpt:

Describes the features of the HTC EVO 3D, covering such topics as phone operations, connecting to Bluetooth and Wi-Fi, emailing, browsing the Web, texting, applications, and customization.

Play with XYZprinting da Vinci 3D Printers

Play with XYZprinting da Vinci 3D Printers
Author: XYZprinting Studio,Allan Lin
Publsiher: 三緯國際立體列印科技股份有限公司(XYZprinting, Inc.)
Total Pages: 214
Release: 2014-11-13
ISBN: 1928374650XXX
Category: Education
Language: EN, FR, DE, ES & NL

Play with XYZprinting da Vinci 3D Printers Book Excerpt:

3D printing is one of the most popular activities and industries in the 21st century. It has turns into an independent product unit although it was once a process during industrial production that was called rapid prototyping. The goal of this book is to lead you discovering the secret of 3D printing. Through easy-to-read-and-understand contents, you are going to realise the well-known technologies of 3D printing. Besides, you can regard this book as a guide of learning da Vinci 3D printers’ operations. The book contains several parts, including 3D printing technologies, 3D printer composition, 3D printing procedure (e.g. modeling, slicing and printing), relative software knowledge, 3D printer maintenance and online resources, etc. There are also online contents that are provided with hyperlinks in order to give you deeper exploration. Please let us know if you have any question by emailing us to “[email protected]”. Your advice will prompt us to a better publisher and your learning partner. Keyword: 3D printing, 3D printer, da Vinci 3D printer, FFF, FDM, XYZprinting, XYZ, 三緯國際立體列印科技股份有限公司, XYZware

3D Printing 101

3D Printing 101
Author: Johannes Wild
Publsiher: XinXii
Total Pages: 75
Release: 2020-03-28
ISBN: 3966332663
Category: Crafts & Hobbies
Language: EN, FR, DE, ES & NL

3D Printing 101 Book Excerpt:

By using this 3D printing guide you can develop a basic and profound understanding of FDM 3D printing. You will learn everything you need to know about how to print objects using an FDM 3D printer. The author of the book is an enthusiastic 3D printing user and engineer (M.Eng.), who will guide you professionally from the basics to even more advanced settings. After a short introduction to the fundamentals of 3D printing and a 3D printer purchase advice, the usage of a 3D printer as well as the required software (free software) is explained in a practical context. Ultimaker ́s Cura is used as a free slicing software and its functions are explained in detail. Several images support the explanations of the book and provide a clear and easy introduction to the topic. The entire process - starting with a .stl file (3D model) all the way to the printed object - is explained by means of descriptive examples (downloadable free of charge). Even if you do not own a 3D printer or do not want to buy one, you will be given an insight into this fascinating technology from the contents of the book. You also have the option of using an external 3D printing service provider or a makerspace instead of an own 3D printer. Table of contents (short form): 1) Possibilities of 3D Printing 2) 3D Printer Purchase Advice 3) First 3D Print 4) Getting started with necessary 3D Printing Software 5) Advanced Objects and Advanced Settings 6) Step by step Slicing and Printing of Examples 7) Materials and Equipment 8) 3D Scanning 9) Troubleshooting and Maintenance This book is intended for anyone interested in 3D Printing. No matter if just for information purposes about the technology or for realizing own models. All procedures are explained in detail and are presented in a way that is very easy to understand. This practice guide is perfect for makers, creative people, inventors, engineers, architects, students, teenagers and so on. Approx. 56 pages.

Mastering 3D Printing

Mastering 3D Printing
Author: Joan Horvath,Rich Cameron
Publsiher: Apress
Total Pages: 347
Release: 2020-05-30
ISBN: 1484258428
Category: Computers
Language: EN, FR, DE, ES & NL

Mastering 3D Printing Book Excerpt:

Get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient.This book is for new 3D printer owners, makers of all kinds, entrepreneurs, technology educators, and anyone curious about what you can do with a 3D printer. In this revised and expanded new edition of Mastering 3D Printing, which has been a trusted resource through five years of evolution in the 3D printing industry, you’ll gain a comprehensive understanding of 3D printing. This book presumes no foreknowledge and describes what you need to know about how printers work, how to decide which type of printer (filament, resin, or powder) makes the most sense for you, and then how to go forward in the case of filament and resin printers. This new edition now includes material about consumer resin printing, the evolution of lower-cost metal printing, and the plethora of both materials and applications. What You’ll LearnChoose among the different 3D printing technologiesCreate or find 3D models to printMake both easy and challenging prints come out as you imaginedAssess whether your business, factory, home or classroom will benefit from 3D printingWork with applications that are good candidates for first projects in home and industrial applications Who This Book Is For People who are encountering 3D printing for the first time, or for those who want to level up their skills. It is designed for the nontechnical adult and minimizes jargon. However more sophisticated users will still find tips and insights of value.

CompTIA A Guide to IT Technical Support

CompTIA A  Guide to IT Technical Support
Author: Jean Andrews,Joy Shelton,Jill West
Publsiher: Cengage Learning
Total Pages: 1164
Release: 2019-02-28
ISBN: 0357108485
Category: Computers
Language: EN, FR, DE, ES & NL

CompTIA A Guide to IT Technical Support Book Excerpt:

Discover a comprehensive introduction to IT technical support as Andrews/Dark/West's COMPTIA A+ GUIDE TO IT TECHNICAL SUPPORT, 10E explains how to work with users as well as install, maintain, troubleshoot and network computer hardware and software. This step-by-step, highly visual best-selling approach uses CompTIA A+ Exam objectives as a framework to prepare you for 220-1001 and 220-1002 certification exams. Each chapter covers core and advanced topics while emphasizing practical application of the most current technology, techniques and industry standards. You study the latest hardware, security, Active Directory, operational procedures, basics of scripting, virtualization, cloud computing, mobile devices and Windows 10 as you prepare for success as an IT support technician or administrator. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Getting Started with 3D Printing

Getting Started with 3D Printing
Author: Liza Wallach Kloski,Nick Kloski
Publsiher: Maker Media, Inc.
Total Pages: 264
Release: 2021-04-18
ISBN: 1680456407
Category: Computers
Language: EN, FR, DE, ES & NL

Getting Started with 3D Printing Book Excerpt:

The book is written in a casual, conversational style. It is easily accessible to those who have no prior knowledge in 3D printing, yet the book's message is solidly practical, technically accurate, and consumer-relevant. The chapters include contemporary, real-life learning exercises and insights for how to buy, use and maintain 3D printers. It also covers free 3D modeling software, as well as 3D printing services for those who don't want to immediately invest in the purchase of a 3D printer. Particular focus is placed on free and paid resources, the various choices available in 3D printing, and tutorials and troubleshooting guides.